Painting with Kansai Premium Exterior Emulsion

New Paint

New surfaces must be clean, dry and free from masonry salts.
Scuff the surface with a suitable sandpaper or sandstone to make the plaster surface smooth. Dust off thoroughly and apply a thin coat of Kansai Premium Exterior Emulsion It will act as a sealing coat for the surface. Let the surface dry for 2-3 hours. Scuff the surface with abrasive paper and dust off.

Repaint for Sound Surface

Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach and let the wet areas dry completely. Dust off thoroughly.

Repaint for powdery, dusty surfaces, cracks & other surface defects

Make good minor defects. For large holes and cracks, use sand and cement mixture. Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff brush and dust off. Treat any area affected by mould, lichens, algae or moss with bleach. Allow the wet areas to dry completely. Dust off thoroughly.

Finishing

Apply 2 or more coats of Kansai Premium Exterior Emulsion with 2-3 hrs intervals in between coats. Dilution ratio to be followed as per application procedure.